in-800 Ce Mobile Approved Newborn Baby Neonatal Infant Incubator

• Certification: CE, ISO13485
• Type: Infant Care Equipments
• Medical Device Regulatory Type: Type 2
• Specification: CE, , ISO
• Trademark: Audo
• Origin: Jiangsu
• Model NO.: IN-800
• Production Capacity: 1000units Per Month

Product Description

STANDARD COMPOSITION:
 Servo Control Mode: air temp;
 Instant Parameter Displaying: set temp, air temp, heat power rate;
 Audible & Visual Alarms: power failure, sensor failure, higher/lower temp, air temperature override, fan failure;
 Power failure reset memory and self-test function;
 Hood with dual slope: 4 hand-ports.

 

SPECIFICATION

POWER
Model B-800-1E...........................................................................................................110 / 120 Vac, 50Hz / 60Hz
Model B-800-2E...........................................................................................................220 / 240 Vac, 50Hz / 60Hz
Power Input ................................................................................................................................................ ≤400VA

ALARM
Power Alarm
Power Failure.................................................Activates if primary power to the Incubator fails or the power wire is accidentally disconnected from the wall receptacle.
Fan Alarm 
Fan Failure........................................................................................................Activates if Fan motor malfunctions.
Sensor Alarm
Air Sensor Failure........................................................................Air Sensor malfunction, refer unit to service.

Deviation Alarm
High Air Temperature........................................Activated if displayed Air Temperature is 1.5ºCabove set point.
Low Air Temperature............................................Activated if displayed Air Temperature is 2.5ºCbelow set point.
Over Temperature Alarm
Over Air Temperature....................Activated when displayed Air Temperature was approach 38ºC in Air Mode.
System Alarm
System Failure .................................................................Activated if Temperature Control System malfunctions.

TEMPERATURE CONTROL RANGE AND CORRELATIVE SPECIFICATIONS
Air Temperature............................................................................................................................20ºC~37ºC
Temperature Rise Time ..................................................................................................................................................... ≤30min
Temperature Variability................................................................................................................................................ ±0.5ºC
Temperature Uniformity................................................................................................................................................ ≤1ºC

ENVIRONMENT REQUIREMENT
Environment Temperature
Operation Temperature Range.............................................................................................................................+20ºC~ +30ºC
Store Temperature Range.................................................................................................-40ºC~ +55ºC
Environment Humidity
Operation Humidity Range............................................................................................................................................30%~75%
Store Humidity Range...................................................................................................................................................10%~100%
Atmospheric Pressure Range..................................................................................................... 700hPa~1060hPa
OTHER SPECIFICATION
Noise Level Within Hood Environment.............................................. ≤55dB(Environment noise below 45dB)
Carbon Dioxide (CO2) Level within the Hood.......................................................Less than 0.5% when a mixture of CO2 in air is delivered at 750ml/min at a point 10cm above the center of the mattress.
Air Velocity Over Mattress.................................................................................less than 0.35m/s
Infant Bed Max Load............................................................................................................................................10kg
Transfusion Shelf Max Load........................................................................................................................................................2kg

FACTORY DEFAULT SETTINGS
Temperature Control Mode.......................................................................................................................Air Temperature Mode
Air Set Temperature..............................................................................................................................................32ºC
Temperature Units.......................................................................................................................................................ºC

Technical Specifications	B-3000	B-2000	B-1000	B-800
Mattress to Hood	450mm	450mm	450mm	450mm
Observation side of hood	Two incline	Two incline	Two incline	Two incline
Operate port	6(2 Iris ports)	6(2 Iris ports)	6(2 Iris ports)	6(2 Iris ports)
Tubing grommets	4	4	4	4
Front access panel	826×310mm	826×310mm	826×310mm	826×310mm
Mattress Tray Size	630×360mm	630×360mm	630×360mm	630×360mm
Technical Specifications
Power requirement	≤400VA	≤400VA	≤400VA	≤400VA
Temperature control mode	Air and skin servocontrol	Air and skin servocontrol	Air and skin servocontrol	Air and skin servocontrol
Air Temp Control Range	20ºC ~ 37ºC	20ºC ~ 37ºC	20ºC ~ 37ºC	20ºC ~ 37ºC
Temperature override mode to	20ºC ~ 39ºC	20ºC ~ 39ºC	20ºC ~ 39ºC	-
Skin Temp Control Range	30ºC ~ 37ºC	30ºC ~ 37ºC	-	-
Temperature override mode to	30ºC ~ 38ºC	30ºC ~ 38ºC	-	-
Skin temp sensor accuracy	≤0.3ºC	≤0.3ºC	-	-
Humidity display range	5% ~ 99%	-	-	-
Temperature fluctuation	≤0.5°	≤0.5°	≤0.5°	≤0.5°
Mattress temperature uniformity	≤0.8°	≤0.8°	≤0.8°	≤0.8°
Temperature rise time	≤30min	≤30min	≤30min	≤30min
Noise level within hood environment	≤55dB	≤55dB	≤55dB	≤55dB
Alarms
Power failure alarm	Yes	Yes	Yes	Yes
Fan failure alarm	Yes	Yes	Yes	Yes
Sensor  failure alarm	Yes	Yes	Yes	Yes
High air temperature alarm	+ 1.5ºC	+ 1.5ºC	+ 1.5ºC	+ 1.5ºC
Low air temperature alarm	- 2.5ºC	- 2.5ºC	- 2.5ºC	- 2.5ºC
High skin temperature alarm	+ 1.0ºC	+ 1.0ºC	-	-
Low skin temperature alarm	- 1.0ºC	- 1.0ºC	-	-
Over air temperature alarm	≤38.0ºC;       ≤40.0ºC	≤38.0ºC;       ≤40.0ºC	≤38.0ºC;       ≤40.0ºC	≤38.0ºC
Over skin temperature alarm	≤38.0ºC;       ≤39.0ºC	≤38.0ºC;       ≤39.0ºC	≤38.0ºC;       ≤39.0ºC	-
System failure alarm	Yes	Yes	Yes	-
Alarm silence function	Yes	Yes	Yes	-
Operational condition
Environment temperature	+20ºC ~ +30ºC	+20ºC ~ +30ºC	+20ºC ~ +30ºC	+20ºC ~ +30ºC
Environment relative humidity	5% ~ 99%	5% ~ 99%	5% ~ 99%	5% ~ 99%
Environment air velocity of flow	∠0.3m/s	∠0.3m/s	∠0.3m/s	∠0.3m/s
Others
RS-232 Connector	Yes	Yes	Yes	-
Rail	Yes	Yes	Yes	-
Infant bed tilt adjusting	±10°step-less	±10°step-less	±10°step-less	-
Mattress tray Max.load	10Kg	10Kg	10Kg	10Kg
Transfusion pole Max.load	2Kg	2Kg	2Kg	2Kg
Cabinet Max.load	6Kg	10Kg	10Kg	-
Packing size(2 cartons)	100×58×80cm	100×58×80cm	100×58×80cm	100×58×80cm
Gross Weight	120Kg	120Kg	120Kg	83Kg