in-800 Ce Mobile Approved Newborn Baby Neonatal Infant Incubator

• Customized: Customized
• Certification: CE, ISO13485
• Scale: Medium
• Type: Infant Incubator
• Medical Device Regulatory Type: Type 2
• Mode: Air Skin
• Model NO.: IN-800
• Power: ≤400va
• Air Temp Control Range: 20ºC-37ºC
• Skin Temp Control Range: 20ºC-37ºC
• Transport Package: Carton
• Specification: CE, ISO
• Trademark: Audo
• Origin: Jiangsu, China
• Production Capacity: 1000 Piece/Pieces Per Month

Product Description

IN-800 CE Mobile Approved Newborn Baby Neonatal Infant Incubator

Standard Composition
 1 Servo Control Mode: air temp;
 2 Instant Parameter Displaying: set temp, air temp, heat power rate;
 3 Audible & Visual Alarms: power failure,  sensor failure, higher/lower temp, air temperature override, fan failure;
 4 Power failure reset memory and self-test function;
 5 Hood with dual slope: 4 hand-ports
 
Specification

Power	Model IN-800-1E		110 / 120 V ac, 50Hz / 60Hz
	Model IN-800-2E		220 / 240 V ac, 50Hz / 60Hz
	Power Input		≤400VA
	Refer to IEC60601-1, this equipment belongs to ClassI, Type BF  Its operation is continuous
Alarm	Power Alarm	Power Failure: Activates if primary power to the Incubator fails or the power wire is accidentally disconnected from the wall receptacle
	Fan Alarm	Fan Failure: Activates if Fan motor malfunctions
	Sensor Alarm	Air Sensor Failure: Air Sensor malfunction, refer unit to service
	Deviation Alarm	High Air Temperature: Activated if displayed Air Temperature is 15°C above set point
		Low Air Temperature: Activated if displayed Air Temperature is 25°C below set point
	Over Temperature Alarm	Over Air Temperature: Activated when displayed Air Temperature was approach 38°C in Air Mode
	System Alarm	System Failure: Activated if Temperature Control System malfunctions
Temperature Control Range and Correlative Specifications	Air Temperature			20°C~37°C
	Temperature Rise Time			≤30min
	Temperature Variability			±0.5°C
	Temperature Uniformity			≤1°C
Environment Requirement	Environment Temperature			Operation Temperature Range	+20°C~+30°C
				Store Temperature Range	-40°C~+55°C
	Environment Humidity			Operation Humidity Range	30%~75%
				Store Humidity Range	10%~100%
	Atmospheric Pressure Range			700hPa~1060hPa
Other Specifications	Noise Level Within Hood Environment			≤55dB(Environment noise below 45dB)
	Carbon Dioxide (CO2) Level within the Hood			Less than 0.5% when a mixture of CO2 in air is delivered at 750ml/min at a point 10cm above the center of the mattress
	Air Velocity Over Mattress			less than 0.3m/s
	Infant Bed Max Load			10kg
	Transfusion Shelf Max Load			2kg
Factory Default Settings	Temperature Control Mode Air Temperature Mode
	Air Set Temperature: 32°C
	Temperature Units:°C

 
NOTE: Open Access Panel or Access Door or the use of supplies or other equipment within the Incubator, which can alter the air flow pattern, may effect temperature uniformity, temperature variability, the correlation of the Incubator temperature reading to center mattress temperature and skin temperature